Keywords: Bandwidth. Prioritisation The Class 1, Class 2 and Class 3 classes are configurable and used to prioritise traffic over each lower priority class, with the lowest class being unclassified traffic, referred to as the Others class. Bandwidth Reservation The priority Classes 1, 2 and 3 can have a reservation for bandwidth if the available bandwidth amount needs to be guaranteed.
Connection Speeds Quality of Service requires the router to be aware of the Bandwidth available speeds that can be achieved on each Internet connection to be able to prioritise correctly. Classes These are used to group the services or IP addresses to prioritise, with Class 1 being the highest priority queue and Others traffic not otherwise classified being the lowest priority. Each class needs to have rules assigned to it to classify traffic.
Monitoring Quality of Service DrayTek's Quality of Service system displays the amount of traffic in each priority queue, which can be useful for understand how each queue is used or troubleshooting the QoS configuration.
In the example above, both calls are using a 20ms delay between RTP audio packets, the deviation from this 20ms delay is referred to as Jitter Jitter - This is the delay between one packet arriving and the next one in sequence arriving. If the packets are out of sequence or the delay is unpredictable, this causes high amounts of Jitter. Most phones compensate for this with a small Jitter buffer to play back audio data packets in a consistent order but significant Jitter can disrupt calls.
High amounts of Packet Loss will cause the audio to break up. Time and Duration of each call. Useful Links. Tick this option to enable QoS on this interface. JavaScript seems to be disabled in your browser.
You must have JavaScript enabled in your browser to utilise the full functionality of this website. Call us: Vigor Keywords: DSCP. Prioritisation The Class 1, Class 2 and Class 3 classes are used to prioritise traffic over the lower classes with the lowest class being unclassified traffic which is referred to as the Others class.
Bandwidth Reservation The classes 1 to 3 can have a reservation for bandwidth the available bandwidth amount needs to be guaranteed - for instance if you have multiple VoIP calls in progress, they may require a certain amount of bandwidth reserved while calls are in progress so normal internet traffic would need to be throttled back slightly. If the bandwidth boxes are greyed out then they don't need to be set From the [Bandwidth Management] - [Quality of Service] page, click Setup for the WAN connection you want to configure the QoS for, you can change the direction of the quality of service which defaults to outbound traffic only.
Classes These are used to group the services that you want to prioritise with Class 1 being the highest priority and Others being the lowest priority. It can be helpful to set a name to identify the traffic types included in the Class 2 rules. Tick the Enable checkbox for each WAN interface that you want to apply Quality of Service to, then configure the settings for that interface:.
The values specified here are amounts reserved for those services while they are actively communicating. The upstream bandwidth is usually the limiting factor, with lower speeds than download bandwidth. Set the reservation to account for the lower amount of upstream bandwidth available.
The router will now begin to prioritise traffic passing through to the Internet, based on these Quality of Service settings. Any traffic to or from the prioritised IP address will now be handled with higher priority than normal traffic and will have the specified amount of bandwidth reserved for it. In this example, the prioritised computer and other devices are all using the Internet at once. The router allocates and reserves bandwidth for the MidPriority class, ensuring it always has bandwidth available:.
How do you rate this article? Error Sorry. Search FAQs. New to Cloud Telephony? Join one of our free live webinars!
0コメント